Custom Winchester Model 70 Monte Carlo Stock (Pre64), RH, FWT, Modified to STD

Custom Winchester Model 70 Monte Carlo Stock (Pre64), RH, FWT, Modified to STD

  • Make: Winchester Repeating Arms Co. –
  • Model: Pre-64 Model 70 (Post War) –
  • Finish/Material: Walnut Satin Finish –
  • Features: Pre-64 Winchester Model 70 Rifle replacement stock for rifles made between 1948 and 1963; This stock features a Featherweight barrel channel and has been modified/widened to accept the “Goose Egg” Rear Sight Boss (bulge) – Rosewood nose cap with whiteline spacer, Pistol grip with whiteline spacer and black diamond with red accent, Monte Carlo raised cheek piece and fluted comb, tapped for sling swivels, White-Line ventilated shotgun style recoil pad with black and white spacer, it’s 31.25″ in overall length with a 13.5″ length of pull – Please review measurements in photos for more details, if more measurements are required, please call us before ordering –
  • Condition: Very Good; in the writer’s opinion the outside surfaces rate between 75% to 85%, exhibiting scattered scratches and scarring, while the inletting exhibits somewhat messy surfaces due to past bedding and fitting, there is a faint impression into the bedding that reads “51 1906” suggesting either previously home to or test fitted to, a MFD 1951 .30-06 SPRNG – As stated earlier, the barrel channel is a featherweight style but is contoured/modified to accommodate a rear sight boss (Standard) barrel contour, though it is not drilled to fit forend stud and thus may require fitting, Otherwise, the stock shows no significant damage or structural wear –

$315.00

Only 1 left in stock

  • Remember:  Parts may require fitting by a trained gunsmith.
  • When purchasing a firearm online:  please get in touch with your local FFL dealer and MAKE SURE they know you will have a gun shipped to them. Failure to do so may incur more fees, hassle, and time. The buyer is responsible for having the firearm purchased to be inspected by a certified or accredited gunsmith for safety.
  • Your State Laws: Even though we do our best to keep up-to-date on individual state laws, it is your responsibility as a resident of that state to know them better than us. If we discover an item can’t be shipped to your location after purchase, we will refund your money minus a 20% restocking fee.
  • Check out the picture(s):  They are the best indication of the product’s condition. If there are multiple of the same item being stocked, you will receive the best-conditioned product we have until they are depleted.
  • Note:  We do not usually accept returns. However, if you are dissatisfied with your product, please email or call us, and we’ll try and work something out. Generally, we charge a 20% restocking fee unless the fault was entirely our own. Returns must be initiated within seven (7) days of receiving your product.
logo_big_white

Celebrating and maintaining America’s heritage. Old Arms of Idaho strives to keep firearms fixable — from the very old to the very new.

Our 24-Hour Gun Show is updated weekly.